We would like to welcome you to the HoldTight 102 Store. We have the best HoldTight 102 price. HoldTight® 102 is a wet blasting additive that prevents flash rusting of wet abrasive and water-blasted iron and steel surfaces and of dry-blasted surfaces in a pressurized wash down. It can be used during wet blasting surface prep or in a maintanence pressure wash. It has set the standard of performance for more than a decade, reduces the cost of maintenance, re-painting, and surface prep by deeply penetrating and removing all contamination, including salt, chlorides, acid, abrasives, oils, and grease. It leaves behind zero residue and evaporates with the water. It will also instantly prevent flash rusting from your wet blasting or pressure wash. It is approved by most major coating suppliers for use with most coatings.
HoldTight®102 salt remover / flash rust inhibitor has set the standard of performance for more than a decade. It KILLS ALL SALTS and STOPS flash rust in one pass, without leaving residue. It can be used for surface prep wet blasting or for maintanence pressure washing. 5 gallon buckets are our most popular size and best value.
BUY NOW
HoldTight®102 salt remover / flash rust preventer has set the standard of performance for more than a decade. It KILLS ALL SALTS and STOPS flash rust in one pass. It evaporates with the water from your wet blasting or pressure wash, leaving your surface clean and prepared for coatings. If used for maintanence pressure washes, it will leave your surface sparkling clean and free of any contaminants, including chlorides, salts, oil, and grease. Smaller 1 gallon size for smaller jobs.
BUY NOWHoldTight 102 is a cost-effective alternative to single purpose, multi-step salt removal products. Independent tests verify that chlorides vanish with HoldTight® 102 salt remover / flash rust inhibitor. Whether you are preparing your surface for a coating with a wet blast or maintaining a coating with a pressure washer, HoldTight is the best wash additive to remove contaminants and prevent flash rusting.
HoldTight kills chlorides, stops flash rust, leaves no residue, and is good to coatings. It's a cost-effective alternative to single purpose, multi-step salt removal products. And, it's coating-friendly and an effective alternative to old fashioned nitrate, phosphate, film-forming, and solvent-based flash rust inhibitors.